How to finish a wooden house inside: how to choose a finishing material
Wooden houses are very popular today. They are distinguished by their originality.
Also, buildings of this type are environmentally friendly. If the house is used throughout the year, then it is imperative to finish, which can be internal and external.
Before deciding how to finish a wooden house inside, you need to become more familiar with the finishing materials.
The content of the article
How to choose a finishing material
Most often carried out interior decoration wooden structure. How to finish a wooden house inside?
Today there is a large selection of finishing materials that are very practical and durable, easy to use.
It could be:
- Plastic.
- Wooden lining.
- Siding.
- Drywall.
- Decorative rock.
- Block house.
Plastic in the decoration of a wooden house
To the question: how to finish a wooden house inside ?, - many answer that there is no more practical and accurate plastic. The price for it is quite affordable.
As a rule, plastic in a wooden house is used in the kitchen area or bathroom.
Plastic has excellent technical characteristics:
- It is moisture resistant and practical. Its surface is not able to absorb a variety of contaminants.
It is also very easy to clean without the use of abrasive products that can damage it. For cleaning, a normal wet rag is suitable. - Also, plastic is easy to install. It can be done with your own hands.
Finishing with plastic of a wooden house can be done completely in all rooms, and there can be decoration of only certain areas.
Tip. Plastic in the working area of a large living room will look very interesting. It can be used not only on the surface of walls, but also on the ceiling. In this case, it will be more rational to initially determine the interior design.
To install plastic, you will need the following tool and material:
- Metal profiles.
- Self-tapping screws.
- Screwdriver.
- Dowels.
- Hammer drill.
- Plastic in sheets or in the form of lining.
- External and external corners from plastic.
Installation of plastic panels:
- Finishing a wooden house Since plastic is carried out on a special frame, then initially you need to start manufacturing it. For this, a crate is constructed from wooden planks and bars.
The width of its cells is at least 30-50 cm. This will allow more firmly to fix such a finishing material on the frame.
Tip. The wooden frame is assembled directly on the surface of the wall. This will save time.
It will also not be very convenient to fasten the whole structure or its individual elements to the wall.
- Before you give preference to plastic in the decoration of a wooden house, you will need to take into account the moment that the use of this material can conceal the space. All this happens for the reason that the frame on the wall surface has a certain height.
As a rule, its minimum is 4-5 cm. For this reason, it is not recommended to use plastic in small rooms. - The crate or frame to the wall is attached with a punch and dowels. Although plastic itself is considered an easy finishing material, it will still be necessary to provide the frame with greater reliability and strength.
- As soon as the crate is ready, plastic is installed.Initially, a starting strip is mounted on the surface of the frame at the side or top.
She will set the right direction for all the finishing material. It is attached to a tree using a construction stapler or self-tapping screws.
Tip. It is best to use a stapler to fasten the starting strip on a wooden frame. It will not take up much space on the inner surface and will be invisible.
- Plastic is inserted into the starting strip, which has special locks at the end. All joints can be treated with sealant for greater structural strength, and such actions will not allow moisture to penetrate inside the room.
- All corners, both external and internal, must be decorated with plastic. Such elements on the surface of the finishing material itself are attached precisely with a construction stapler.
Tip. So that the staples from the stapler are not visible, it will be possible to cover them with putty, which has a similar color with a plastic lining. And in order not to carry out such actions, it is best to opt for liquid nails.
This product is applied to the surface of the corner and the finishing material itself.. You need to be extremely careful so that the excess composition does not come to the surface.
This type of work can only be carried out after the room is completely finished with plastic. They will be the final stage of finishing work.
Wooden lining in the decoration of the premises of a tree
What to finish house of timber inside? Of course, it would be more logical to apply a natural finishing material - a wooden lining.
It is practical and has the same technical characteristics as the building material for building a house.
See a photo with an example of such a design of a wooden house from the inside. The choice of this finishing material will give integrity and harmony to the room.
But, it is worth considering the moment that the tree absorbs moisture very well. For this reason, it is not recommended to use it for decoration of bathrooms or rooms with high humidity.
Finishing Features:
- So that condensation does not collect under the surface of the wooden lining, it will be necessary to carry out not only insulation, but also insulation work. All this will only positively affect the condition of the wooden structure and will significantly increase its service life.
- As insulation materials, foam or polyurethane foam is very often used. Minvata is also very popular, only in wooden houses it should be covered with a layer of other insulating material.
For example, the same foam is of small thickness. Thus, it will last longer, because over time, it loses its properties. - The quality and quantity of finishing and insulation work of a wooden house will depend more on the building material itself. Such work is harder to carry out on the surface of a rounded beam than on a glued surface.
All this happens for the reason that the first has a convex surface and before proceeding to the finishing, caulking is done (closing the cracks that form as a result of laying the trees).
In order to install a wooden lining you will need:
- Wooden planks and small bars.
- Screwdriver.
- Hammer drill.
- Wood screws.
- Sealant.
- Jigsaw or saw.
Installation:
- Initially, the area that is subject to such decoration is determined. It can be a whole room, or maybe just the bottom of the walls.
Wooden planks are mounted on the wall surface along an already defined perimeter at a set height. If finishing with a wooden lining of the whole room, then the slats should be mounted both below and above.
- A wooden lining is already being typed on these planks. It is fastened with self-tapping screws. At the end, she has special locks that help fasten all the elements of the finishing material.
In principle, the whole process of work is very much like finishing the room with a plastic lining. The video shows an example of such finishing work.
Tip.
If the surface of the wooden lining is not covered with paint and varnish, then it will need to be covered after the installation is completed. This will give integrity to the structure and a variety of matting agents can be used to give a different shade to the wood.
Decorative stone in the decoration of wooden walls
This material has become popular relatively recently. It looks very interesting on the surface of wooden walls.
A decorative stone can add a twist to the whole interior, since in its appearance it has practically no differences from natural stone.
Material Features:
- Decorative stone is moisture resistant and practical.
- Finishing with its use will be durable.
- It is mounted only on a flat surface. It is for this reason that in houses made of logs it is quite rare to find it in the design of a room, which cannot be said about houses made of glued beams or even logs.
- The process of leveling surfaces in such a structure does not take much time and plaster can be applied.
Tip. Decorative stone is glued using special glue or cement mortar. It is better to add PVA glue to the cement mortar, which will only increase the viscosity.
As such, installation instructions for decorative stone do not exist. It is necessary to adhere to certain rules that are suitable for fixing ceramic tiles.
Before deciding how to decorate the walls inside a wooden house, you need to consult with specialists in this field and evaluate the technical characteristics of all modern finishing materials.
Only then can you make the right choice.
