Timber house interior decoration: design ideas

Gusevsky Andrey Anatolyevich

Wooden house decorating ideas

There is nothing more environmentally friendly and original than a wooden structure. The house can be made of logs and profiled timber.
In order for the building to serve from such building material for many years, high-quality interior decoration of the timber house is made.

Popular finishes

All finishing works in a wooden structure are divided into: exterior and interior decoration of a timber house. If the outside of a house made of wood is rarely to be finished, since it can significantly spoil the appearance of the building, then interior decoration can strengthen and insulate the walls of the house.
There are various options for the interior decoration of a house made of timber.
It could be:

• Decorative rock.
• Block house.
• Plastic lining.
• Panel siding.
• Wooden lining.
• Drywall and more.

Photos of the interior decoration of the wooden structure are very diverse. Very often, more than one material is used in finishing work.
There are interesting and original room designs that are striking in their practicality.

Decorative stone in the decoration of a wooden house

Decorative stone in the interior

Finishing inside the timber house can be done with decorative stone.. This design of the room looks very original and aesthetically beautiful.
Since the walls of profiled timber have a fairly flat surface, the cost of their alignment will be negligible.
The main characteristics of the material:

• Decorative stone is an analogue of natural natural stone.
• It is moisture resistant and very durable.
• Although it is not made from natural substances, decorative stone is still environmentally friendly.
• With its help, unique and original interiors of wooden buildings are created. Stone and wood have long been used in decoration.
  They look together very original.
• The surface of the decorative material is not able to absorb a variety of contaminants. It is easy to clean. To do this, it is enough to use a damp rag.

Tip. Do not clean the surface of decorative stone with abrasive products. It can be damaged and the appearance of the material will simply deteriorate.

What should be provided during installation work

So:

• Artificial stone is very easy to install. To do this, you will need to make some preparatory work on a wooden wall.
  Since the wooden walls of the profiled beam will have small cracks that were formed as a result of masonry, you need to caulk using linen thread or use moss for these purposes.
• The cracks are all qualitatively sealed up and only after that it is possible to start finishing finishing work on the wall surface.
• Decorative stone lies on a flat surface. Since it has a small weight, it will not be necessary to pre-assemble a wire mesh reinforcement mesh and a stucco building mesh on the wall surface, which cannot be said about natural stone.
• You can even out the surface of a wooden wall with plasterboard or plaster. Sometimes for such purposes a thin sheet of plywood or OSB is used.
• Plaster is applied to wooden walls quite simply.It is sold in bulk.
• In order to get a quality solution, you need to dilute it with a certain amount of water. For this, there is a special instruction on the packaging, according to which such actions are carried out.
• There is a start and finish plaster. They cannot be interchangeable, since they perform only those functions that are assigned to them.
  Starting is used to level surfaces, and finishing plaster performs decorative functions and hides defects of the starting layer.

Tip. It is also possible to use drywall to smooth the surfaces of wooden walls. It is mounted on a profile metal frame.
That is, it turns out a kind of crate on which sheets of drywall are attached.

Stages of mounting decorative stone

To install decorative stone you need:

• Special glue or cement mortar.
• Decorative rock.
• Two spatulas (small).
• Level.
• Putty (if necessary).

Laying:

• The entire installation process will depend on the size of the finishing material itself. Glue or cement mortar is applied to the inner surface of the stone and to the wall with a spatula.
  The second spatula eliminates excess solution from the surface of the material. You need to fasten the decorative stone close to each other. But, it all depends on what type of masonry was chosen.
• Each element of such a finish must be laid down strictly according to the level. Of course, there are sizes of stones that are stacked in a chaotic manner.
  Then you will need to measure the required area of ​​the finish and outline it on the surface.
• After the installation of decorative stone, all the joints can be covered with special means, or you can add coloring substances to the solution and at the same time lay and finish the surface.

The video shows an example of mounting decorative stone. Everyone can cope with such work.

Wooden lining and block house in the decoration of a wooden house

Installation of a block house

Inner home decoration from profiled timber can be made using wooden lining or block house.
These materials are similar in their technical characteristics. They create design integrity.
Distinctive features:

• But, before using such materials, it is necessary to take into account the moment that wood absorbs moisture quite well and for this reason it is not worth using them in rooms where there is high humidity.
• Finishing materials of this type are distinguished by their environmental friendliness and practicality. They look great in a wooden structure.
  Their surface is very protected from various pollution and insects. As a rule, it is varnished.
• The materials are quite strong and durable. Most often they are used to decorate a living room or bedroom.
  They are very interesting to combine with decorative stone or natural.

To install a wooden lining or block house, you need:

• Wood screws.
• Screwdriver.
• The material itself.
• Level.
• Wooden bars.

Previously, a starting wooden strip is installed on the wall surface. The material itself is already being installed on it.
It will be possible to make a wooden crate and place a heater in its cells. Thus, insulation and finishing work will be carried out simultaneously.

Plastic lining and siding in the design of wooden walls

Siding Installation Technology

Very often, the interior decoration of houses made of timber is carried out using plastic or siding. The materials are moisture resistant and it is for this reason that they are used in the kitchen and sanitary zone.
Distinctive features:

• The surface of such materials is not able to absorb impurities and therefore it is very easy to clean.
• They are also characterized by their easy installation and it is possible to do it yourself and not resort to the help of a specialist, which will greatly save the family budget.
• The price of these finishing materials is quite affordable, compared with a wooden lining or decorative stone.

For installation you will need:

• Wooden blocks and small boards.
• Wood screws with long and short legs.
• Screwdriver.
• Sealant.

Installation:

• Finishing a house from a bar inside with siding or plastic begins with the manufacture of a crate. They are mounted from wooden boards and bars directly on the surface of the wall.
  It is attached using self-tapping screws with long legs. All elements are self-tapping screws with small legs.
• As soon as the crate is ready, the fastening of materials begins with the installation of the starting strip, which touches the entire direction of the material. Plastic strips or siding sheets are already inserted into it.
  You can fasten individual elements together with a construction stapler.

Tip. To impart strength to the entire finish, each joint of these materials must be sealed.

The use of drywall in the decoration of a wooden structure

Drywall has been used for many years in almost all finishing work.. With its help, not only are the surfaces aligned, but also a variety of ceiling structures are constructed.
The interior decoration with plasterboard of a house from a bar will be practical and durable.

Tip. It is not recommended to use drywall in small rooms, since such a finishing method can hide the space.

Drywall in the interior of a wooden house

To install such a finishing material you will need:

• Metallic profile.
• Drywall sheets.
• Wide-head screws.
• Screwdriver.
• Dowels.
• Hammer drill.

Installation:

• Finishing inside the house of timber with the use of drywall begins with the construction of the frame. It is made of a metal profile, which is mounted on the wall surface with dowels.
• Plasterboard sheets are mounted on this frame with self-tapping screws and a screwdriver. To adjust the desired sheet size is not difficult.
  This material is cut with a regular clerical knife.
• After that, the joints of the sheets are processed with putty and you can paint or glue the surface. Very often, decorative plaster is applied to it, which gives the room a rich look.

Well, wooden house decoration over!

As a rule, finishing houses from timber is not difficult. To do this, you will only need to choose the right finishing material, and you can do all the work yourself.
There is nothing complicated in this today.