Glued beam houses: interior decoration and its features

Gusevsky Andrey Anatolyevich

Features of the interior decoration of the house from glued beams

Today there is no more original structure than a wooden house. It can be built of rounded and glued beams.
What is the difference between such structures? The main difference between them is that the walls of the rounded beam do not have a flat surface, like a glued beam.
It is for this reason that the interior decoration of glued-beam houses is quite simple.

Finishing Features

We can say that wooden house without any decoration it looks very beautiful. All such work is necessary for the reason that a house with their help can last much longer.

Tip. It is very important to make insulation and decoration in those wooden houses that are operated all year round.

Very often for wall decoration from glued beams used:

• Paints and varnishes.
• Block house.
• Wooden lining.
• Plastic.

The surface of the walls is varnished inside only if the walls are insulated and finished on the outside. Otherwise, this method of decoration will be only decorative in nature.

Block house in the decoration of a wooden house

Block house in the interior decoration of a wooden house

What is a block house? These are wooden panels that have a convex surface on one side and a flat one on the other.
In appearance, this finishing material very much resembles a lining. It is widely used not only for interior decoration, but also for exterior (seeBlock house for exterior decoration: characteristics and installation features).
It is practical and has a beautiful aesthetic appearance.
Features of the blockhouse:

• The wood, which is used to make the block house, goes through several stages of preparation.
• Initially, it is dried in special dryers, then it is processed with antiseptic agents and only after that a varnish coating can be applied to its surface.
• It all depends on the type of material. There are varnish surfaces of the block house, and there are natural ones.

Tip. If the stripes of the block house are not treated with any paints and varnishes, then it will be better to coat its surface with varnish yourself. This will help protect the finishing material from any impact on it.

• The advantage of a block house is that it is reliably protected from decay. All this thanks to the long work on the preparation of the material.
• Also, it does not deform under pressure or physical exertion and does not change its appearance over time.

Tip. The only thing that needs to be taken into account is that it cannot be used in unheated rooms in a cold period of time. This is because, due to the difference in temperature conditions inside the room and outside, condensate can collect underneath such finishing material, which has a negative effect on wooden walls and on the material.

Everyone has long known that wood absorbs moisture well. After that, insects can start in it.
Also, due to the temperature difference, the tree may dry out and dry out. It is for this reason that it will be more rational to carry out insulation and insulation before finishing work using such material.

Insulation and insulation of a wooden house

The scheme of insulation and warming of a wooden house

There is a very large selection at the moment of insulation and insulation materials.For these purposes, even one kind can be used, for example, foam or polyurethane foam.

Tip. To insulate a wooden structure, it is not recommended to use mineral wool. It absorbs moisture well and eventually loses its technical characteristics.

Instructions for insulation and insulation

So:

• It is especially important to take this point into account if, nevertheless, a block house is chosen as the finish.
• Since the walls of glued burs are a relatively flat surface, then all the work on them will be very simple. You can do them yourself and not resort to the help of a specialist.
• Initially, it will be necessary to close all the cracks between the logs. For this, as a rule, moss or flaxseed is used.
  Materials are also considered environmentally friendly.
• After such work, it will be necessary to fix the insulation and insulation material on the surface. Let's say it will be polystyrene foam, the price is very low, and the material itself is universal (insulation and insulator).
  It is mounted on the surface of the wall with building glue or liquid nails.
• You can think through the process of insulation and decoration at the same time. In order to fix the block house, you will need to first make a kind of crate.

If insulation material will already be fixed on the walls, the process of installing such a crate will be a little difficult. That is why it will be more rational to initially make a frame on the wall surface and already put insulation in its cells.

Block House Finish

Blockhouse Installation Technology

As mentioned above, the block house is attached to the frame (crate). But here you can use another way.
To install such a finishing material, a sheet of plywood or very thin OSB is often attached to the wall surface. It will be mounted on them facade decoration material.
In this case, insulation and insulation work can be done immediately, since sheets of plywood or OSB will be placed on top of them.
To fix the block house you will need:

• Wood screws.
• Liquid Nails.
• Sealant.
• Screwdriver.
• Level.

Finishing Stages

So:

• Since the material on the inside has a very smooth surface, its installation will not be difficult. Stripes of the block house must begin to be mounted from top to bottom.
  Thus, on the visible part of the wall there will be only whole elements of such a peculiar design.
• The panels of this material have special locks at the end. To give the mount greater strength, all joints of the strips should be treated with sealant, which will make it possible to protect the premises from increasing air humidity.

For the decoration of corners in the room there are special wooden external and internal corners. They are attached to the finishing material itself using self-tapping screws. If the block house is not varnished, then covering its surface will be more rational after finishing work.

Wooden lining in the decoration of a house made of wood

Wood has excellent technical characteristics. To use it in the decoration of a wooden house means to give integrity to the whole structure.
Home decoration from glued beams with the use of lining will look very original. The photo shows examples of such a room decoration.

Lining in a wooden house

Wooden lining:

• Practical.
• Durable
• Easy to install.
• It has a large selection of sizes and designs.

Lining Features:

• In its appearance, wooden lining is more reminiscent of plastic. The difference will be the color scheme and the weight of the material itself.
  Dimensions may also be similar.
• A wooden lining may have a flat surface, or maybe there will be a variety of ornaments on the surface that are made using wood carvings. This type of finishing material is considered to be design.
  From the stripes of the lining you can collect very original images on the wall.
• As a rule, wooden lining is already initially covered with varnish and matting agents, which give the color of the surface of the wood. If there is no paint layer on its surface, then it will be better to varnish the surface after finishing work.
• The lining is attached to the frame of wooden planks, which are mounted on the surface of the wall. In such works, it is also possible to carry out insulation and insulation.

In order to carry out the installation of such a finishing material you will need:

• Wood screws.
• Screwdriver.
• Sealant.
• Level.

Simple installation instructions:

• It is necessary to drive strips from the entrance to the room so that only the whole elements of the wooden lining are on the surface of the wall. If you need to adjust the size, then use a conventional saw or jigsaw.
  All panel joints are treated with sealant.
• The video shows an example of such work on finishing a wooden house with clapboard. In such works there is nothing complicated and everyone can cope with them.
  There is a certain installation instruction, observing which you need to fix the wooden lining.

Finishing in a wooden house can be external and internal. Outside, wooden buildings are rarely finished.
All this can adversely affect the appearance of the structure itself. It is best to carry out interior decoration and insulation. Such work is not required to be carried out in the entire structure.
Finishing can carry a decorative decoration, such as artificial stone or cork materials.