Features of eurolining - a little about wintering

Rybnikov Alexey

Eurolining recently began to be in great demand in decoration. This is due to the attractive type of material.

Decorating the premises with eurolining.

Methods for installing eurolining

There are currently two mounting methods:

1. To the surface.
2. To the frame.

Note. Due to the fact that it is possible to mount the material on a frame or crate, it is possible to make the building warm and insulate.

Used for this:

1. Styrofoam.
2. Styrofoam.
3. Extruded polystyrene.

Tip. You can use other materials that are produced in mats and have a dense structure.

Euroboard Properties

Eurolining is made of wood, which goes through several stages of drying and only then it is processed with special antiseptic agents.

Lining:

• Durable. Its surface is able to withstand heavy loads.
• Practical for the reason that it does not require special care, because after coating the surface with varnish it is not able to absorb dirt.
• Durable The life of such material depends on its proper use.
• Wear resistant. If the installation is carried out correctly and all the necessary conditions are created in the room, then the external design of the euro lining will remain for a long period of time.

Installation of euro-lining on the frame

Recommendations

Eurolining is not a moisture resistant material, as it has a wood structure. It is able to absorb moisture and respond to it by deformation.

Tip. Do not use euro lining for decoration in rooms with high humidity.

Obligatory will be: Installation of the Eurocar on a special frame.

Tip. If during the installation process insulation work is carried out, then on top of the first frame you need to build a second one to provide an air cushion. It is necessary for the reason that the material is natural and can freely pass air.

Features of the installation of eurolining

Euro lining can be mounted on any surface.

Only in such works there are certain requirements:

• Making an air cushion for normal ventilation of the finish.
• If the house is brick, then the surface will not require additional preparation.
• If the surface is made of adobe or other porous building material, then it is necessary to plaster or putty.

Very important:

• The room in which the surfaces are made using eurolining should be with a constant temperature regime.
• Moisture and dampness in the room should not be.

There are also some nuances.:

• If the room is not heated throughout the year, then after you drop into it, you need to ventilate it well so that the material gets used to the new temperature regime and only then turn on the heating.
• If the room is heated at intervals, then the lining may begin to deform.

• Also, the building material from which the walls of the building are erected plays an important role.

Tip. If the house is old and the walls are made of adobe, then it is necessary to make its external insulation and ventilation gap. In such a room, the eurolining will be more comfortable and the probability of its deformation is low.

If the exterior work on the building is not completed, then there is the possibility of seeing a deformed finish on the surface after a wet and cold winter.