What is the compressor performance for a fur coat on the basement of the house

Maslyakova Svetlana

Attention. The answer is for informational purposes only and is not advertising in nature. The specialists of our site wrote guided solely by their own opinion based on their own experience.

Compressor operation diagram

Choosing the right equipment always only has a positive effect on quality. finishes and the speed of all work.

Why is a compressor used for applying to the surface of a fur coat

Such equipment allows you to very quickly apply a finishing agent to the surface. There are two types of spray gun:

• Electric.
• Pneumatic.

The best are electric spray guns for applying a fur coat, since they go without additional intake of air masses during operation. Pneumatic ones can turn off as they heat up, as they cannot cool by themselves. This property is characteristic only of electric spray guns.

The most popular manufacturers of spray guns that are used for applying a fur coat

How to choose a spray gun

At the moment, there are two manufacturers of such equipment that are very popular:

• Ligaton.
• FIAC COSMOS.

Note. They produce a very large number of nozzles for their equipment, which can be used for applying not only fur coatsbut also paint.

The compressor power in this case is:

• 6 bar.
• 8 bar.
• 10 bar.
• 12 bar.

How to work:

• For applying a fur coat, it is not necessary to use the highest power, since the product will simply fly to the surface without even distribution. It is also worth considering that there is a fur coat with pointed spray ends, and there are round ones.

• The last option for applying a fur coat is the most optimal, since the finish will last a longer period of time for the reason that it will not repaint.

Tip. It is better to apply a fur coat at a power of 8 or 10 bar. All other powers are more suitable for painting surfaces.

It is also worth considering which gun is used. It can be with a wide nozzle or with a shallow one. For a fur coat, it is more suitable with a wide nozzle, since the product will not get stuck in the hole and this makes the quality of the finish higher.