Seamless texture of decorative plaster

Gusevsky Andrey Anatolyevich

Seamless decorative stucco texture

The seamless texture of decorative plaster allows you to finish the surface and at the same time it will look harmonious and attractive. In this case, it is necessary to make a seam, which should not be.

After all, this can ruin the attractiveness of the plane. Today we will tell you how seamless plaster textures are applied. You can also watch the video in this article and the photo and choose the best option for the job.

Stucco texture

Decorative plaster Seamless texture can be applied on many materials. In this matter, your imagination is of great importance, and drawing will already be a matter of technology.

In principle, any material can be applied with your own hands, you just need to choose the right coating. Below is an instruction on various materials and you need to choose the most suitable material.

There is only one moment, because the foundation itself can be made of two types of coating and you make the right choice:

• The first is the material for exterior surfaces. It has a larger fraction, but tolerates the weather very well. It is also recommended for use in unheated rooms. As a basis, cement is mainly used here.
• The second option is a material for finishing internal surfaces. It has a finer fraction and is made on the basis of gypsum. The surface is smooth and here it is necessary to make the plane. The seamless texture of the plaster is crucial here.

Covering in a decorative style for your surface is an excellent solution for the repair and decoration of style in the room. This type of coating shows the refined style of its owner, as well as personal individual character.

The advantages of decorative plaster include:

• There is a special unique feeling of laying such a coating. If you hit old times, then the room will become warm and cozy at the same time, if you lay a stone, you will feel confident and noble. If you have metal material, then luxury and wealth will flow in the room.
• High environmental friendliness.
• Unique character and top quality. A wide range of building materials choices satisfy the tastes of all aesthetes. We guarantee with a high degree of probability that all types of such coatings have a large and unique variety in color. Even a master with extensive experience and work experience will not be able to make the same copy of your repair.
• High level of durability. There is absolutely no need to care for decorative type plaster, the color remains for a long period of time, and the brightness is also not lost over the years. In some way to spoil the plaster, you need to make great efforts.
• Decorative plaster has a high level of sound insulationThis is because this type of coating absorbs all the sounds inward. Using this building material, you can create an excellent atmosphere for listening to audio recordings. We hear recordings in such a room in a natural and completely unobtrusive way. One gets the feeling that the singer himself is standing in front of us and is performing his composition.
• Long term of operation. Plaster decorative type will delight its owners for many years.If the client needs to change the color scheme, then you can simply repaint the surface in a different color, clean it to the concrete layer, putty it to a perfectly even state and then make the decorativeness of your choice.
• Smells practically do not get into decorative plaster.
• Excellent degree of protection against steam and external influences.
• Plaster has a universal application, it can be laid on the surface of absolutely any type (if they are properly prepared), whether it be brick luggage (see Let's consider how to plaster a brick wall) or concrete.
• A huge number of options for styling and design: natural images, patterns of all shapes and designs, copies of a granite base or monolithic surface. You can create indefinitely, and it all depends on the level of development of your imagination.

Types of decorative plaster

Stucco of decorative type can be divided into a large number of types: by the type of the composite element of communication, the material - the basis, the formation factors or the type of laying of the images on the base. The main classification is based on fillers that are in its content.

Let's look at the types of plaster available on the modern market:

Seamless plaster texture can be quite different in composition, so there is a different price. But do not chase the cheapness. Give preference to trusted brands. Let the price be a little higher, but you win in the durability of the coating.

We prepare a surface for laying

For any type of coating when applying plaster, it is first necessary to prepare the surface in a special way.

Plane preparation

• First of all, we remove the previous coating in full: we clean the walls of old wallpaper, use a putty knife to work, the coating can be sprayed a little with water to facilitate the process. We also remove all remaining parts: a spatula, a special hair dryer for construction, you can buy special solvents.
• As soon as we completely removed and cleaned the old coating, you need to wash the wall or ceiling: we take an ordinary rag and detergents. If the base has a large number of cracks and holes, then the first thing to do is to repair and align them. It also depends on the type of plaster, for example, the Venetian requires a perfectly even coating. We use ordinary putty for such types of work.
• Primed surface must be in any case. Using a layer of soil we will remove all scratches and cracks, they increase the adhesive properties. For a certain type of plaster, a special primer is also needed, from here manufacturers of building materials immediately write their recommendations on the boxes.

Attention: If the wall has metal in its composition, then it must first be treated with a special composition, otherwise you can find out later after repairing the brown heel from corrosion and rust.

If the walls have just been erected, and so far there is no previous coating on it, then you can only put a layer of lime on the surface. Although specialists in construction and repair, even in this case, are advised to use primers for preliminary surface preparation.

List of required tools

In order to do a quality job of laying putty, you need to choose a special set of tools, although the minimum set can be defined as follows: spatulas of different types, iron, containers for the building material itself, a set of rollers, varnishes and paints. Paint is used to give the plaster a special and desired color, and varnish is a fixing agent for paint and a layer of soil.

Apply the plaster to the surface.

In order to correctly and skillfully lay decorative type plaster, the first thing to do is preparatory work for its application.

Apply a plane texture

Attention: If you bought ready-made plasters, then you need to pay close attention to the expiration date of this building material and look at the conditions of its operation.

Next, we produce the mixing of the finished composition and join in the work of laying the coating layer. The plasters begin to harden for a long time, from here there is absolutely no need to rush to put the material.

It is also worth saying that the material must be ductile. Its uniformity can be achieved by using a drill with a nozzle in the manufacture.

So:

• If dry plaster was at your disposal, then the manufacturer took care of the proportions and noted this information in the instructions.Dry plaster quickly hardens, so you need to do it immediately in such a way that all the necessary amount of work is done in one go, otherwise we will see hardened plaster directly in our container, from here we will have to hurry a bit.
• We put the finished composition with a spatula in the same even layer on the prepared surface, as soon as it begins to harden, we begin to create a relief base. For such work, we need rollers, brushes, any parts of the products to create an indescribable variety of patterns. The work is done in different ways, we apply all the available tools and conduct them on the basis, everything is limited only by the flight of your imagination. The thickness of the plaster is made dependent on the number and complexity of the patterns, as well as on the effect that you plan to create in your room during the repair and construction.
• Usually in practice they make a patterned surface in the form of rain and stripes of a different nature. The work starts from the corners of the surface, there you can practice a little and get the right level of skill. The whole process should occur quickly, since you need to monitor the absence of joints.
• As soon as the surface shine passes (about twenty minutes), we take a smoothing machine and work on the surface, smoothing the laying base. We periodically wash our tool in water.
• After a day, we pass along the surface with a sandpaper.
• Particular difficulties arise when laying the Venetian surface, you yourself can not cope.
• If you have developed talent, you can create magnificent and unique patterns on the wall, you can start working right away from the center of the base.

The seamless texture of plaster is not as complex as creative. It will take a lot of time. So be patient and get to work.