Finishing the facade of a wooden house: we select the material

Gusevsky Andrey Anatolyevich

Types of finishing a wooden house

Finishing the facades of wooden houses is a rather serious issue, which should be approached comprehensively and correctly. There are many materials on the market and it can be difficult to figure out sometimes.
In this article we will consider how to finish the facade of a wooden house. What materials should be used for this and what is their difference.
To get started, you should look at the photos and videos and find the right design solution.
And then make your choice. Let's look at all these issues.

What is the decoration of the facade of the house for?

Many do not particularly understand why lining and why spend money on it. Of course, if you have made a design of front brick and properly performed insulation, then you can refrain from this.
But if you want to change the look and make insulation, then you can not do without it. Let's first determine what the facade cladding is done for and then decide which facade materials wooden houses we will choose.
So:

• First of all, we will consider the facade as a design solution. He will make your house visible and distinguish it from others. Here you can realize your dreams;
• Facade decoration should also be as protection of the building from the effects of the external environment. It will extend the life of the entire structure.
  The finish must be strong and reliable in this regard. To transfer and temperature differences and at the same time do not lose their appearance;
• Finishing of wooden houses of facades must meet the requirements of fire safety and life with fire-resistant material. This will also serve as protection for the wooden structure;
• Perform the functions of heat and noise insulation. Protect from heat loss and this will save you costs.

Materials for decorating the facade of a wooden house

Here the question is in your preferences. You have already looked at the finishing materials and made a design decision.
Now let's take a look at what kind of material and what it is.

Surface plaster

It is not strange, but this kind of finish can often be found. Many take this particular type of finish.
Let's see what it is typical for and what lies ahead:

• It should immediately be said that such stucco decoration done after installation of the cladding, which is done using a wooden beam;

Attention: Before installation, the timber should be treated with antiseptics, which are commercially available. Do this without fail, then you will extend the life of the entire product.

• First, a waterproofing is attached to the surface of the plane, which will protect the logs from moisture and only after that the installation of the crate;
• It will require the use of a reinforcing mesh facade, which will ensure the reliability of fastening of the plaster;
• You can use mineral plasters for this, which give only light tones of the finish;
• When using acrylic materials, you let the tree breathe, they let air through. This material is not so easy to damage mechanically, so it is more durable;
• Only such work is a long process that can be done with your own hands, but it will take a lot of time.

Attention: For such a finish, the issue of the solution, which must be prepared efficiently, is extremely important. Pay particular attention to this.

Application of curtain wall

This type of finish appeared on the sales market not so long ago. It is based on a hinged structure, which is mounted on a plane and then facing is made.
This finish is quite attractive and let's see what:

• You do insulation from the outside of the wall.
  In this embodiment, the dew point is shifted to the insulation layer, this removes moisture from the main plane. This is very important with a wooden structure;
• You can apply for wooden house finishes almost any material, and this is extremely important in terms of design decisions. Many materials can be applied;
• The design provides a ventilation gap, which helps to remove moisture;
• Installation is relatively short. You can do this work with your own hands, which will save on the cost of the entire structure;
• Such a system allows you to absorb thermal differences, it is extremely important when the temperature drops;
• The design provides materials that are generally fireproof or slightly flammable. Therefore, there will be no questions from firefighters.

Attention: Before buying such a facade, look at the weight of the structure, which can be heavy for your building. Choose the best option, choose what and why.

Brick finish

This finish is most often used.
It has many advantages that attract:

• Finishing the facade of the house with wooden bricks will significantly increase the strength of the entire structure;

Caution: Before making a decision, pay attention to the foundation of the house. It must withstand the weight of the structure, which is large enough.
It should also fit the width of a brick. The size of the foundation after installing the brick should protrude 10 cm. Minimum from the cladding.
Otherwise, the foundation will have to be expanded.

• There will be an opportunity to make additional warming at home. Lining will also protect the tree from external influences.
  It is environmentally friendly and fireproof material;
• You can significantly distinguish your structure from others. Give your home the look you want.

Attention: For buildings that have recently been built, did not dry out completely and did not shrink, it is better not to do such a lining immediately.

Siding

Facade decoration siding quite attractive these days. She is made facing many.
In this option, you immediately decide such questions:

Installation of siding on the facade of a wooden house

• The installation price is quite low and you will save on this;
• Such a cladding is suitable even with a not strong foundation, the weight of the structure is not large;
• Work execution time is perhaps the shortest among analogues;
• Not a complicated installation, which is quite capable of doing it on its own, especially since special equipment is not required. Such tools are in almost any household;
• You will make protection for a wooden surface. Protect it from external influences.

The scheme of warming a wooden house when facing siding

Attention: When buying material, look at the quality certificate. He must be.
Prefer only trusted manufacturers. Beware of cheap Chinese-made.
Such products may not be safe for health. To emit harmful odors when heated.

Thermal panels with clinker tiles

In our time, quite original materials have appeared that amaze with ingenuity. And the practical side is on top.

Installation of panels with clinker tiles on the facade of the house

So:

• Mounting is done directly to the wall. For this, you can simply use self-tapping screws.
  But this option is only suitable if the plane is flat, otherwise you will need to install a frame, which is made of a metal profile or wooden battens;
• Such a material has a fairly high vapor permeability;
• By itself, it will significantly increase the vapor and waterproofing of the walls;
• The weight of the structure is quite low and no foundation reinforcement is required;
• Withstands significant temperature differences, which range from - 60 * to + 100 *;
• The service life is up to 30 years, and this is from the manufacturer;
• A fairly large frost resistance cycle, which goes over 300 cycles;
• Good water absorption, which does not exceed 2 percent throughout the day;
• It is fireproof material;
• No complicated maintenance and quick repairs. You can always easily replace the panel;
• Large color gamut, which can be selected for a specific structure;
• This work can be completely done by yourself, than save money.

Finishing a wooden house with a block house

This finishing material is also recently in the sales market. It is a panel that imitates the structure under the finish with a solid wooden beam.
Let's see what we get as a result of such finishing material:

Finishing a wooden house with a block house

• The design will be quite aesthetic and stand out among other buildings;
• Resistance to mechanical stress;
• It is an environmentally friendly material;
• Immediately get additional thermal insulation;

You have the opportunity to choose the material for the production of the block house:

• There is a design that is made of wood; here, the environmental friendliness of the material should be attributed. It has a smooth and durable surface that is less prone to cracking.
• There is a material that is produced on the basis of polymers. Eats several textures of the surface of the material and you can choose exactly what you need.
  Such material is probably more suitable for outdoor decoration. It is less exposed to the environment.

These were the materials that are used most often.
For each type of installation on our site there is a detailed instruction that you can always read. The most important thing is not to make a mistake in choosing the material.