Consider how to paint the walls with a roller

Gusevsky Andrey Anatolyevich

How to paint walls with a roller without stains

How to paint the walls with a roller? Making repairs yourself is not so difficult. But, as with any operation, there are some nuances. Particular attention should be paid to painting the walls - it can be done with a brush or roller. When painting with your own hands, a more preferred option is to use a roller. How to do this will tell the article.

What types of rollers are used for painting walls

Before choosing a roller for painting walls, you need to get acquainted with their types and choose the best option. This is due to the fact that not every kind of tool can be used for all walls.

The main types of rollers are shown in the photo:

Paint rollers for walls

• Foam rubber. Used for applying varnishes and glue. The tool can wear out very quickly. It is better to use it when processing the ceiling.

Tip: Do not paint walls with foam rollers. They absorb a lot of paint, which will cause the appearance of numerous smudges and drops.

• Fur They are distinguished by good absorbency, when applying paint they leave it almost all on the treated surface. Such rollers allow the layer to get uniform without smudges and unpleasant drops. Suitable for any paints. Disadvantage: villi remain on the surface.
• Velor Used for all types of paints. After their application smooth beautiful layers without roughness are formed. But at the same time, the rollers absorb a large amount of paint.
• Polyamide or filament. In this case, the roller is made of fabric that is sewn with threads. Ideal for covering walls with any kind of paint. It is convenient to work with them, they are durable. But when staining, care must be taken - they spray paint.

Tip: When choosing a tool, it should be carefully inspected. There should not be any fibers protruding on the surface of the roller. Fur coats must be chosen with a long pile, if there are bumps or wallpaper with a deep pattern on the walls. With a short pile, the fur coat is chosen with even walls.

When choosing rollers, it is necessary to take into account not only the type of material from which they are made, but also their width. Optimal for a city apartment will be a tool whose width is up to 30 centimeters. Too wide a roller will create difficulties in work. It’s quite difficult for them to paint, and it will require more paint.

Tip: When purchasing a roller, you need to pick up accessories for it. To do this, you will need to purchase an extension handle that facilitates painting, and a special grater to remove excess paint.

The advantages of painting walls with a roller are:

• The ability to perform processing of large areas in a short time, and the surface at the same time, get even and smooth.
• Walls with this object are much more convenient and pleasant to paint than with a brush.
• In the case of a sufficiently high and large surface, a long handle can be connected to the roller, which will make it possible to paint the entire wall while on the floor.

The disadvantages of the tool include:

• The inconvenience of painting joints and corners, which an ordinary brush does well.
• Absorption by some materials of a large amount of paint. In this case, it is necessary to use the device for pressing the paint.

How to prepare a room for painting walls

Before painting the walls with a roller without stripes, you will need to purchase:

• Rollers of different relief and sizes.
• Sandpaper for grinding walls by hand.
• Paper masking tape, which will protect various elements from pollution by paint.
• Tray for paint.

Tools for work

After that you will need:

• Remove the curtains.
• Move to the middle of the room and close the furniture with plastic wrap, you can use special covers.
• Protect against possible drops of paint from the baseboard and other interior elements with masking tape. Its price is small, and it will bring many benefits.

Skirting protection with masking tape

Tip: Windows, doors and floors should be covered with plastic wrap, fixing it with masking tape.

• Turn off the power.
• Remove the covers on the switches and sockets, which will qualitatively paint the places near these elements without smearing electrical equipment with paint.
• Cover the inside of the circuit breakers and outlets with masking tape to prevent droplets of paint and dirt.
• Temporarily remove the radiators, which will paint the surface of the walls behind them. In this case:

1. heating valves are blocked;
2. a pallet is placed in the place of supply of pipes so that water does not fall on the floor;
3. unscrew the union nuts that connect the radiator to the pipes;
4. water comes down;
5. the radiator is removed from the brackets that hold it;
6. the liquid remaining in it is poured.

Tip: It is necessary to remove the top layer from the surface of the wall with a spatula, clean it with sandpaper, making it smooth. When painting the walls on which the wallpaper was glued, removing the top layer is not required. It is enough to prime the surface.

To align the walls, eliminate various defects on them before painting, you must:

• Fill holes and cracks with plaster or putty (see Aligning the walls with putty in accordance with all the rules) using a small flat spatula.
• After drying of the applied material, the surface is smoothed out with 120 grit sandpaper.
• Dust and dirt are removed from the walls with a sponge or clean rags using a suitable detergent composition.
• Vacuuming the floor.

In addition to preparing the walls, the roller itself must also be brought into proper condition.

When using a fur roller you will need:

• Soak it for about three hours in soapy water.
• Wash the product in running water.
• Dry thoroughly.

Such an instruction for preparing the roller will allow carrying out painting work without lint on the painted walls, which simply will not fall out of the tool.

How to paint the walls with a roller

After preparing the surface, choosing with which roller it is better to paint the walls, you can start painting the walls.

For this:

• A small amount of paint is poured into a special bath.
• A roller is dipped into it, as shown in the photo.

Dipping the roller in the bath

• The roller rolls on a grid or on the corrugations of the bath itself. This will allow the paint to lie evenly throughout the pile. This is done several times.
• The order of painting the walls is determined, and from where to start.
• It is better to do this from the corner of the room located at the window.
• Then you can move in any direction.

How to paint the walls with a roller

To prevent stains and drops from remaining on the walls of paint, they should be properly painted with a roller.

Wherein:

• Do not press the product too hard.
• It is necessary to paint over the entire surface evenly, without empty gaps.
• All movements must be performed smoothly.
• First, the roller must be led from top to bottom, then vice versa.
• Smooth movements should be on their own and a little diagonal.

Tip: When carrying out work, paint should be thoroughly shaded.

• To obtain a saturated color, the paint should be applied in several layers.
• The second layer is applied after the first has completely dried. In this case, you can move in the horizontal direction, and then vertically.
• Movement should be done from top to bottom.
• Completely paint over the corners will not work.They will need to be painted over with a brush.

Which roller is better for painting walls, how to care for it, how to apply paint correctly, the video in this article tells.

How to care for the roller

After the end of all operations, the tool is stored.

To increase its service life it is necessary:

• After applying water-based paint, the tool is washed in clean water., and without squeezing, so that the roller does not lose its original shape, hanged for drying.
• After varnishes and acrylic paint, the roller should be cleaned with a special composition. It is better to purchase it in advance, and perform the roller cleaning procedure immediately after the end of work.

Any tool needs careful maintenance, regardless of the type of material from which it is made. Without cleaning, it will quickly become unusable in the future.